Shenzhen Qianhai Lensen Technology Co., Ltd
Lensen help your system link faster
Add to Cart
As a professional manufacturer of printed circuit board, our PCB factory has been focusing on the production of PCB for more than 16 years.
So here we recommend it you. Welcome to contact us and send your inquiry if you need PCB, PCBA service.
Details
Thickness: 0.4mm, 0.6mm, 0.8mm, 1.0mm,1.2mm,1.6mm, 2.0mm,2.4mm,3.0mm,
Copper thickness: 1OZ, 2OZ, 3OZ optional
Surface finish: HASL, Lead free HASL, ENIG, OSP, gold finger optional
Contour: CNC routing, Punching outline optional
Solder mask: green, blue, yellow, red, and black optional
Technical requirement: min trace: 4mil (0.1mm), min hole: 0.2mm (8mil),
Quality stable, price competitive
Ability
| Item | Technical Parameters | Remarks | ||
| Min. Line Width(mil) | 3/4 | Partial 3mil lines is allowed | ||
| Min. Space(mil) | 3/4 | Partial 3mil lines is allowed | ||
| Min. Annular Ring Width(mil) | VIAS:3mil | Remained ring width means the distance between the hole edge to the ring outskirt | ||
| Component Holes: 6mils | ||||
|
Min. Hole Size
|
Board Thickness<2.0mm | 0.1mm | Refers to the finished hole | |
| Board Thickness>=2.0mm | Aspect Ratio<=12 | Refers to the finished hole | ||
| Max. Board Thickness | Single and Double Sided | 5.0mm | ||
| Multilayer | 5.0mm | |||
|
Min. Board Thickness
|
Single and Double Sided | 0.2mm | ||
| Multilayer | 4 layers:0.4mm, 6 layers: 0.7mm, 8 layers:1.1mm, 10 layers:1.6mm | |||
| Max. Board Size | Single and Double Sided | 650 x 1100mm | ||
| Multilayer | 650 x 1100mm | |||
| Distance between Line to Board edge | Outline:0.25mm | |||
| V-CUT: 0.4mm | ||||
| Max. Layers | 18 layers | |||
| Solder mask | Mask Window(mil) | 2/4 | ||
| Mask Bridge(mil) | 6 | |||
| Color | Green Yellow Red Blue White Black | |||
| Legend | Min. Line Width(mil) | 5/8 | ||
| Color | White, Black, Yellow, ect. | |||
| Surface Plating | HAL(with Pb free), Plated Ni/Au, Ag, Imm Ni/Au, Imm Sn, Ag, OSP etc. | |||
| Finished Board Thickness Tolerance: |
0.2mm<T<0.5mm: ± 0.05mm; T<0.8mm: ±10% T≥0.8mm, ±8% |
|||